San Pedro Roof Repair, Replacement & Installation
San Pedro Roofing & Maintenance handles every roofing job from a single-shingle repair to a full commercial re-roof. Here's what we do in San Pedro.
Roof Replacement
Replacement cost depends on your roof size, pitch, and material choice. We quote by the square (100 sq ft) and itemize everything so you can compare apples to apples. In San Pedro, most residential replacements fall between $8,500 and $24,000. We offer financing if that helps.
Get a Free Quote →
Roof Repair
We warranty every repair for 5 years. If the same area leaks again due to our workmanship, we come back free. That warranty is in writing and it means something because we're a local San Pedro company. We're not disappearing.
Get a Free Quote →
Storm Damage Repair
Wind damage and hail damage look different and require different documentation. Our HAAG-trained inspectors know what adjusters look for: granule displacement patterns, fractures in the shingle mat, seal failures, cracked ridge caps. Proper documentation is why our claims get approved.
Get a Free Quote →
New Roof Installation
New construction underlayment per IRC R905 and ASTM D226 (felt) or ASTM D6757 (synthetic). Ice barrier per ASTM D1970 required at eaves in climate zones with average January temperature below 25°F. We install ice and water shield regardless. It's cheap insurance against ice dams and wind-driven rain. Drip edge per IRC R905.2.8.5 on eave and rake edges. Proper starter strip with factory sealant for wind resistance from day one.
Get a Free Quote →
Metal Roofing
Metal roof repairs are usually sealant failures at transitions, loose panels from improper installation, or rust spots on older galvanized systems. Our San Pedro crew repairs all metal types. Not every issue needs a full replacement. Sometimes a sealant touch-up or panel re-securing solves it.
Get a Free Quote →
Shingle Roofing
We install every major shingle brand: GAF Timberline HDZ, Owens Corning Duration, CertainTeed Landmark, Atlas Pinnacle, Tamko Heritage, Malarkey Vista, and IKO Cambridge. Each brand has different warranty tiers, wind ratings, and price points. We help you compare without pushing one brand over another.
Get a Free Quote →
Flat Roofing
Flat roofs don't actually drain themselves. That's the challenge. Water ponds, UV breaks down the membrane, and eventually it leaks. We install and repair TPO, PVC, EPDM, modified bitumen, and built-up roofing systems designed for zero-slope conditions in San Pedro.
Get a Free Quote →
Commercial Roofing
Commercial roofing in San Pedro means flat and low-slope systems: TPO, EPDM, PVC, modified bitumen, and built-up roofing. We install and repair all of them. Retail, warehouse, office, restaurant, multi-family. Our commercial crew handles buildings from 2,000 to 100,000 square feet.
Get a Free Quote →
Gutter Installation
Half-round copper gutters with round downspouts are the premium install for historic and high-end homes in San Pedro. We solder every joint on-site with 50/50 tin-lead solder. Copper weathers to a green patina in California's climate over 5-7 years. For modern aluminum installs, we use Spectra Metals .027 gauge seamless stock in 25+ color options with Raytec hidden hangers rated to 25 lbs per linear foot of combined debris and ice load.
Get a Free Quote →
Roof Inspection
Annual inspections catch small problems early. A cracked pipe boot is a $150 repair. A year of water leaking through that crack causes $3,000+ in ceiling, insulation, and drywall damage. We recommend an inspection every 2-3 years for newer roofs, annually for roofs over 15 years.
Get a Free Quote →
Emergency Roof Repair
Emergency tarping is step one. Stop the water. We secure heavy-duty poly tarps over the damaged area using 2x4 nailer boards attached to the deck. Once the immediate threat is contained, we schedule the permanent repair within 48-72 hours.
Get a Free Quote →
Skylight Installation
VELUX FS (fixed) and VS (vented) skylights installed with EDL flashing kits for shingle roofs. The multi-step flashing integrates with the surrounding shingle courses per IRC R903.2. We frame the curb with doubled 2x8 or 2x10 lumber (depending on rafter depth), install ice and water shield membrane around the entire curb perimeter, then set the skylight with factory sealant before weaving step flashing into the field. Top headwall flashing tucks under the upslope shingle course. Bottom sill pan diverts water onto the downslope shingles. Zero exposed sealant joints. Mechanical flashing only.
Get a Free Quote →